Other Additives
Light Conversion Agent
White solid. Easily incorporated into polymers by powder, solution, or melt (0.2–3 wt%). Recommended use: Suitable for various high-performance polymers and alloys such as PET, PBT, PC (linear and branched), polyetherester, PMMA, acrylic copolymers, PA, PS, SAN, ASA, and polyolefins—reinforced or non-reinforced, filled or non-filled, flame-retardant or non-flame-retardant, transparent, translucent, or opaque systems. Safety and handling: Follow good industrial practice; avoid unnecessary personal contact. Avoid continuous or repeated inhalation of dust. Use in well-ventilated conditions. Prevent environmental contamination. Avoid dust formation and ignition sources. Refer to the MSDS. Read the relevant safety information in the MSDS carefully before accepting this product.
Learn More >>
Polycarbodiimide Hydrolysis Stabilizer
White to slightly yellow powder. Recommended dosage: 0.2%–1%
Learn More >>
n-Butyl p-Toluenesulfonate
Metal corrosivity Category I; Acute toxicity (oral) Category IV; Skin corrosion/irritation Category IB; Serious eye damage/eye irritation Category I; Skin sensitization Category I; Germ cell mutagenicity Category II; Carcinogenicity Category II. Signal word: Danger. Hazard statements: May corrode metals. Harmful if swallowed. Causes severe skin burns and eye damage. May cause an allergic skin reaction. Suspected of causing genetic defects. Suspected of causing cancer. Precautionary statements: Prevention: Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep only in the original container. Do not breathe dust/fume/gas/mist/vapors/spray. Wash thoroughly after handling. Do not eat, drink, or smoke where this product is used. Contaminated work clothing must not be removed from the workplace. Wear protective gloves/protective clothing/eye protection/face protection/hearing protection. Response: If swallowed: if feeling unwell, call a poison center/doctor/… and rinse mouth. Do NOT induce vomiting. If on skin (or hair): remove all contaminated clothing immediately. Rinse skin with water [or shower]. Specific treatment (see below). If skin irritation or rash occurs: seek medical advice/attention. Wash contaminated clothing before reuse. If inhaled: move person to fresh air and keep comfortable for breathing. Call a poison center/doctor/… immediately. Specific treatment (see below). If in eyes: rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. Call a poison center/doctor/… immediately. If exposed or concerned: seek medical advice/attention. Absorb spillage to prevent material damage.
Learn More >>
